You may want to order large volume ATM Paper Rolls from us,but before you place any order,you want to get ATM paper samples first.Yes,it is very reasonable request.Here in this article,we will give you guide about tip for making ATM samples.
1.Confirm ATM Paper Size
Referring to this article about how to measure paper roll.Same ways for ATM rolls,the factors you should measure are:
Width : the regular ATM paper width is 80mm (79mm)
Diameter: It is up to the ATM machine brand & model (NCR,Wincor,etc)
Core: It is usually plastic or paperboard
Length: It is not a MUST,but it can be reference for us if you confirm
2.Sensor Mark Size & Measurement
Sensor mark size is a key factor for ATM rolls,it determines if the rolls can work out well in the machine.
3.ATM Roll Wrapped Direction
You can read this article about wrapped direction of paper rolls.Usually 2 points need to be cleared :
- Which side is with sensor mark printing ? Thermal or non-thermal side
- Which side is wrapped outside? Thermal or non-thermal side
Once all above points are confirmed,then it is high time for us to begin to make the ATM paper samples. ( Read this to know more about making printing roll samples)